FR4 X-ray Detector Carbon Ink PCB
Carbon ink PCB
1. Carbon elements or patterns are printed with a conductive carbon ink and can be used for keyboard contacts, LCD contacts, jumpers, etc…
2. Always clearly indicate on which side of the PCB carbon is to be applied. This can be on one side or on both sides.
Indicate the position by proper file naming and a clear buildup or layer sequence description in the mechanical layer (See section Input data requirements – point 2, 3 and section Mechanical layer point 3)
3. When generating output include the board outline in your carbon layer(s).
This is best done using a small line – e.g. 0.50mm (20mil) wide – where the center of the line is the exact board outline. We will remove this line from the production-ready data.