Work done by the CAM

1. pad the size of correction, combined d-code.

2. the amendment to line width, combined d-code.

3. minimum spacing checks between the pad and the pad and the pad and between the lines, between the line and the line.

4. check of aperture size, combined.

5. checking of the minimum line width.

6. solder mask expansion parameters were determined.

7. the mirror.

8. Add a variety of craft, the craft box.

9. line width for the fixed edges correction.

10. the center hole.

11. add profile corner.

12. the positioning holes.

13. imposition, rotating, mirroring.

14. chip.

15. graphic overlay, angle the tangent handle.

16. Add user mark.