Double Sided HDI Pcb Board
High Tg CCL is Available(Tg>=170℃)
Finish Board Thickness
0.3 mm-6.00mm(8mil -126mil)
Solder Mask(black, green, white, red, blue, thickness>=12um, Block,BGA)
Silkscreen(black, yellow, white)
Peel able-mask(red, blue, thickness>=300um)
1/2 oz min; 12oz max
Double sided HDI pcb board:
XD company's HDI technology can meet customers' product requirements. The HDI PCB we produce uses full digital signal processing (DSP) technology and a number of patented technologies. It has a full range of adaptive load capacity and strong short-term overload capacity. It is not necessary to consider the load power factor and the crest factor.
HDI PCB products are more miniaturized while meeting higher standards for electronic performance and efficiency. HDI PCB is widely used in mobile phones, digital (camera) cameras, MP3, MP4, notebook computers, automotive electronics and other digital products, among which mobile phones are the most widely used. HDI PCB is generally manufactured using the build-up method. The more times it is laminated, the higher the technical level of the board. Ordinary HDI boards are basically laminated one time, and high-level HDI uses two or more lamination technologies. At the same time, advanced PCB technologies such as stacked holes, plated hole filling, and laser direct drilling are used. High-end HDI boards are mainly used in 5G mobile phones, advanced digital cameras, and IC carrier boards.
HDI PCB advantage:
1. Can reduce PCB cost: When the density of the PCB increases by more than eight layers, the HDI is used to make it, and the cost will be lower than that of the traditional complicated lamination process.
2. Increase circuit density: the interconnection of traditional circuit boards and parts
3. Conducive to the use of advanced construction technology
4. Has better electrical performance and signal accuracy
5. Better reliability
6.Can improve thermal properties
7. Can improve RFI / EMI / ESD
8. Increase design efficiency
Q1: Is it all right to make customer's own brand name?
A:We can customize LOGO service for customers.
Q2:Are you a manufactuer or trading company?
A:We are a manufacturer for more than 10 years.
Q3:Can you do the design for us?
A:We have our own R & D team.
Q4:How can I get a sample to check your quality?
A:After the sample is completed, you can entrust us to test it for you or send it back for self-test.
Q5:How long can I expect to get the sample?
A:For PCB you can get it in 1 week;For PCBA, It depends on your components.
Q6:Packaging & Shipping?
A:Our products will have separate isolation packaging, and there are multiple professional agency options for shipping.
Tel: +86-0755-29621535 EXT 812