Rogers BGA Cars Double Layers Circuit Board PCB

Rogers BGA Cars Double Layers Circuit Board PCB
Chat Now
Product Details

Rogers BGA Cars double layers circuit board pcb


Introduction

This is a double sided pcb board for Cars. The circuit board is made by BGA surface finish with Rogers materials and green solder mask. Cars board is very common and popular. The board lifespan would be reach about 5 years with good performance and 100% top quality. Our boards have been passed RoHS, ISO9001 certification. Our boards are mainly used in European, America, and Mid-Africa.


Specification

BGA's full name Ball Grid Array (solder ball array package), which is in the bottom of the package substrate array solder ball as the circuit I / O terminals and printed circuit board (PCB) interconnection. The device using this technology is a surface mount device package.

 

PBG (Plastic Ball Grid Array), which uses BT resin / glass laminate as the substrate, plastic (epoxy molding compound) as the sealing material, solder ball can be divided into lead solder (63Sn37Pb, 62Sn36Pb2Ag) and lead-free solder Sn96.5Ag3Cu0.5), solder ball and package connections do not require additional use of solder.

 


1LayersSingle Sided,2 to 18 Layer
2Board material typeFR4,Rogers,Taconic,F4B,Isola,Nelco and more
3Compound material lamination4 to 6 layers
4Maximum dimension610 x 1,100mm
5Dimension tolerance±0.13mm
6Board thickness coverage0.2 to 6.00mm
7Board thickness toleranceBoard thickness≤1.0mm: +/-0.1mm
1<Board thickness≤2.0mm: +/-10%
Board thickness>2.0mm: +/-8%
8DK thickness0.076 to 6.00mm
9Minimum line width0.10mm
10Minimum line space0.10mm
11Outer layer copper thickness8.75 to 175µm
12Inner layer copper thickness17.5 to 175µm
13Drilling hole diameter (mechanical drill)0.25 to 6.00mm
14Finished hole diameter (mechanical drill)0.20 to 6.00mm
15Hole diameter tolerance (mechanical drill)0.05mm
16Hole position tolerance (mechanical drill)0.075mm
17Laser drill hole size0.10mm
18Board thickness and hole diameter ratio10:01
19Solder mask typeGreen, Yellow, Black, Purple, Blue, White and Red
20Minimum solder maskØ0.10mm
21Minimum size of solder mask separation ring0.05mm
22Solder mask oil plug hole diameter0.25 to 0.60mm
23Impedance control tolerance±10%
24Surface finishHot air level, ENIG, immersion silver, gold plating, immersion tin and gold finger
25CertificateROHS, ISO9001:2008, SGS, UL certificate
26Acceptable file formatGerber file,PROTEL series,PADS series,POWER PCB series,AutoCAD
 


Feedback