Rogers HASL Solar Heating 4 Layers PCB
Specifications of Rogers HASL 4 Layers PCB:
4 layers PCB
1/2 oz min; 12oz max
Finish Board Thickness
0.2 mm-6.00mm(8mil -126mil)Surface Finish
Solder Mask(black, green, white, red, blue, thickness>=12um, Block,
Silkscreen(black, yellow, white)
Peel able-mask(red, blue, thickness>=300um)
+/-0.05mm(2mil) or +/-20% of original
110 x 100mm(min)
660 x 600mm(max)
Min Trace Width & Line Spacing
0.075mm /0.075mm (3mil/3mil)
Min Hole Diameter for CNC Drilling
Min Hole Diameter for Punching
+/-0.075mm(3mil) CNC Drilling
HASL Surface Finish:
HASL or hot air solder leveling is a type of finish used on printed circuit boards(PCBs). The PCB is typically dipped into a bath of molten solder so that all exposedcopper surfaces are covered by solder. Excess solder is removed by passing the PCBbetween hot air knives.
Xinda PCB offers high frequency PCB with Rogers material. We can be your go to source for high frequency PCB with Rogers material. We have what you need when you need it. Xinda PCB has provided high quality printed circuit boards.
1. Audio equipment: input, output amplifier, balanced amplifier, audio amplifier, preamplifier, power amplifier, etc.
2.Power equipment, switching regulator “DC/AC converter” SW regulator, etc.
3.Communication electronic equipment: high frequency increase ” filtering electrical” transmitting circuit.
4.Office automation equipment, motor drives, etc.
5.Automobile, electronic regulator “igniter” power controller, etc.
6.Computer: CPU board “diskette drive” power supply device, etc.
7.Power module, inverter “solid relay” rectifier bridge, etc.
1.PCB Layout,PCB design, PCB Production
2.Make high difficulty PCB(1-38 layers boards)
3.offer all Electric components
5.PCB delivery time:5-10 days;
View of factory:
Tel: +86-0755-29621535 EXT 822