Rogers HASL Electronic Device Single Sided PCB

Rogers HASL Electronic Device Single Sided PCB
Chat Now
Product Details

Rogers HASL Electronic Device Single Sided PCB


The pcb board material is customized as the design for different electronic devices. For example, this single sided board use Rogers material to keep the good performance. Surface finish is common HASL-lead free. Our engineers very carefully make the pads, soldering, and vias in the boards. We strive to make top quality to our customers as their requirement.


Profile tolerance±0.10mm(4mil)
Board bend&warp≤0.7%
Insulation resistance>1012Ωnormal
Through-hole resistance<300Ωnormal
Electric strength>1.3kv/mm
Current breakdown10A
Peel strength1.4N/mm
Soldmask regidity>6H
Thermal stress288℃20Sec
Testing voltage50-300v
Min buried blind via0.2mm(8mil)
Outer cooper thickness1oz-5oz
Inner cooper thickness1/2 oz-4oz
Aspect ratio8:1
SMT min green oil width0.08mm
Min green oil open window0.05mm
Insulation layer thickness0.075mm-5mm
Special technologyInpedance,blind buried via,thick gold,aluminumPCB
Surface finishHASL,lead free,Immersion gold,immersion tin,immersion silver,ENIG,Blue glue,gold plating




Board thickness:1.6mm

Copper thickness:35um

Solder mask:green

Surface finish:HASL-lead free



A dielectric material is a substance that is a poor conductor of electricity, and used as an insulating layer in the PCB build up. Porcelain, mica, glass, plastics and some metal oxides are good dielectrics. The lower the dielectric loss, (the proportion of energy lost as heat) the more effective the dielectric material. If the voltage across a dielectric material becomes too great -- that is, if the electrostatic field becomes too intense -- the material will suddenly begin to conduct current. This phenomenon is called dielectric breakdown.